Skip to content

Common High Priority List (CHPL): tiers, HS codes, red flags

What the Common High Priority List is, its six HS code tiers, why a flagged code is a red flag, not a license answer, and what to check next.

By Michael Green, Editor. Published . 12 min read.

Flowchart: when a booking carries a Common High Priority List code. 1, confirm the HS, HTS or Schedule B code matches the goods. 2, find the ECCN or EAR99. 3, check destination and route: to Russia or Belarus, 15 CFR 746.8 license rules apply; elsewhere, look for transshipment risk. 4, screen every party by name and address. 5, ask about end use and end user. 6, ask who owns the parties. 7, explain the red flags or stop and disclose. 8, keep the file. A flagged code is a red flag, not a determination.
Eight checks when an invoice or booking shows a CHPL code. Diagram by Kleerance, drawn from the sources cited in this guide. General information, not legal advice. How we make and check images

The Common High Priority List (CHPL) is a list of 50 items, identified by six-digit HS codes, that BIS developed with the EU, Japan and the UK because Russia seeks them for its weapons programs. A CHPL code on an invoice or booking is a red flag that calls for extra due diligence on the parties, end use and route. It does not, by itself, tell you whether an export license is needed.

Key points

  • What it is: 50 HS-6 codes in six tiers (1, 2, 3.A, 3.B, 4.A, 4.B), dated February 23, 2024 on the BIS CHPL page.
  • Why it exists: BIS says the items pose a heightened risk of illegal diversion to Russia. The same list is published by the UK, the EU and Japan.
  • Highest priority: Tiers 1 and 2 hold nine codes, mostly integrated circuits, wireless modules, GNSS modules and capacitors.
  • To Russia or Belarus: in our comparison, all 50 CHPL codes also appear in EAR Supplement No. 4 to Part 746, which carries a license requirement for items subject to the EAR going to or within those countries.
  • The real risk is third countries: the guidance is aimed at diversion through intermediaries and transshipment points, so the code matters on shipments that never name Russia.
  • What to do: treat a flagged code as a trigger to screen every party, ask about end use and end user, and record what you found.

Screen a party in under a minute

Type a customer, consignee or end user and see any potential matches on 24 official lists, including US, UN, EU, UK, Canada, Switzerland and Japan sanctions and export lists, each linked to the official record.

Free to try. No account or card needed.

What is the Common High Priority List?

Since February 24, 2022, the Bureau of Industry and Security (BIS), part of the US Department of Commerce, has imposed export controls meant to cut off Russia's access to the technology it needs for its war against Ukraine, and BIS applies them to Belarus as well. The CHPL grew out of that work. According to the BIS page, it identifies 50 items, by six-digit Harmonized System (HS) code, that Russia seeks for its weapons programs and that are at heightened risk of diversion, and it may be updated as new information becomes available. The version shown on the page is dated February 23, 2024.

The UK Foreign, Commonwealth & Development Office publishes the same list on GOV.UK, describing it as Western items critical to Russian weapons systems and its military development, and telling businesses to carry out due diligence so that the end destination is not Russia. The GOV.UK page was last updated on August 8, 2024.

Three things make the CHPL different from the lists most compliance teams screen every day:

  1. It lists goods, not parties. The Entity List, the Denied Persons List and the SDN List name companies and people. The CHPL names product categories by HS code.
  2. It is shared across allies. The codes are common to the US, EU, UK and Japan, so a supplier in any of those places is working from the same list.
  3. It is a due diligence tool. The BIS page says the items include both EAR99 items and more sensitive items on the Commerce Control List. The list is there to tell exporters, reexporters and their service providers where to look hardest, not to classify anything.

The six CHPL tiers

The list calls itself four tiers, but Tiers 3 and 4 are each split in two, so the tables show six groups. The counts below are our tally of the codes on the BIS page.

TierWhat BIS says it coversHS codes
1Items of highest concern, critical to advanced Russian precision-guided weapons, with little Russian production and few global manufacturers4
2More electronics that Russia may make itself but prefers to source from the US and its allies and partners5
3.AMore electronic components found in Russian weapons, available from many more suppliers16
3.BMechanical and other components used in Russian weapons systems9
4.AManufacturing, production and quality testing equipment for electronic components, circuit boards and modules11
4.BComputer numerically controlled (CNC) machine tools and components5
Total50

Tier 1 and Tier 2: the nine priority codes

The BIS guidance on the prioritized HS codes lists the nine codes in Tiers 1 and 2 with examples of what each one covers:

HS codeCovers (BIS examples)Tier
8542.31Processors and controllers, such as microcontrollers1
8542.32Memories, such as SRAM1
8542.33Amplifiers, such as op amps1
8542.39Other integrated circuits, such as FPGAs1
8517.62Machines for receiving, converting and transmitting data, such as wireless transceiver modules2
8526.91Radio navigational aid apparatus, such as GNSS modules2
8532.21Tantalum capacitors2
8532.24Multilayer ceramic capacitors2
8548.00Electrical parts of machinery not specified elsewhere in chapter 85, such as EMI filters2

The FinCEN and BIS supplemental alert of May 19, 2023 explains where this shortlist came from: components recovered from Russian weapons in Ukraine, including the Kalibr and Kh-101 cruise missiles and the Orlan-10 UAV. The alert also stresses that these codes are not an exhaustive list of what Russia is trying to buy.

Tiers 3 and 4

The longer tiers move from parts to the machines that make parts. Tier 3.A includes processing units, static convertors, network apparatus, cameras, antennas, connectors, diodes, transistors and other semiconductor devices. Tier 3.B covers ball and roller bearings, aircraft parts, telescopic sights and navigation instruments. Tier 4.A covers machines for making wafers and semiconductor devices, printed circuits, signal generators, oscilloscopes and other test instruments, and Tier 4.B covers numerically controlled machining centers, lathes and milling machines and machine-tool parts. The full 50-row table, with BIS's descriptions, is printed on our HS code check page and on the BIS page itself.

How the CHPL relates to US export controls

The CHPL does not create a license requirement of its own. The legal requirements sit in the Export Administration Regulations (EAR), mainly in § 746.8, the Russia and Belarus sanctions section.

  • Items listed by HS code. Under § 746.8(a)(5), a license is required to export, reexport or transfer (in-country) to or within Russia or Belarus any item subject to the EAR that is listed in Supplement No. 4 to Part 746. That supplement lists HTS-6 codes, and the supplement's own note extends the requirement to longer 8- and 10-digit codes that begin with a listed six-digit code.
  • Items on the Commerce Control List. Section 746.8 says an item in Supplements 4, 5 or 6 that is classified under an ECCN is handled under the other paragraphs of the section, chiefly § 746.8(a)(1), rather than under (a)(5).
  • Foreign-produced items. Paragraphs (a)(2) and (a)(3) of § 746.8 require licenses for certain foreign-made items under the foreign direct product rules in § 734.9(f) and (g). The BIS CHPL page notes that the nine Tier 1 and 2 codes are subject to the most comprehensive EAR controls, including those foreign-produced items.
  • License policy and exceptions. Applications under § 746.8 are generally reviewed under a policy of denial, with case-by-case review for limited categories such as humanitarian needs and civil telecommunications infrastructure, and only the license exceptions listed in § 746.8(c) are available.

The nine priority codes also appear in Supplement No. 7 to Part 746, which BIS's prioritized HS code guidance gives as the place they are listed; that supplement lists items that need a license when destined to Russia or Belarus, as well as to Crimea and Iran.

Every CHPL code is also in Supplement No. 4

We compared the 50 CHPL codes with the 2,405 HTS-6 rows of Supplement No. 4 to Part 746 (eCFR text as of October 20, 2026, last re-checked against the live eCFR on October 26, 2026). All 50 are there:

TierCHPL codesAlso in Supplement No. 4
144
255
3.A1616
3.B99
4.A1111
4.B55

In practice, this means that a shipment of any CHPL item subject to the EAR that is going to Russia or Belarus faces a license requirement, whether through Supplement No. 4 or, for items with an ECCN, through § 746.8(a)(1). That is why the CHPL guidance focuses on everywhere else. A direct shipment to Moscow is already controlled; the risk the list targets is the same goods going to a distributor in a third country that passes them on.

The comparison is a snapshot. Supplement No. 4 is amended by Federal Register rules, so check the current eCFR text rather than relying on this table for a live transaction.

Why a CHPL code on a third-country shipment matters

The BIS page warns that Russia uses intermediaries, transshipment points and deceptive tactics to get around controls, and that violations can lead to civil or criminal liability and to listing on the Entity List or the OFAC SDN List. The agency's red flag FAQs (August 2022) name destinations it says are prone to use as transshipment points, including Armenia, China, Georgia, India, Kazakhstan, Kyrgyzstan, Turkey and the United Arab Emirates, among others, and say the list is not exhaustive.

None of that makes a sale to those countries unlawful. US items can go there as production inputs. But when a CHPL code, a destination of that kind and a new or unusual customer line up, the government expects you to look harder before the goods move.

CHPL red flags to watch for

The Export Enforcement Five guidance for industry, issued by Australia, Canada, New Zealand, the UK and the US, and the May 2023 FinCEN and BIS alert list similar indicators. Paraphrased:

  • A payment for dual-use goods from a company incorporated after February 24, 2022 in a country outside the Global Export Control Coalition.
  • A new customer for Tier 1 or 2 items, based outside the coalition, set up after that date.
  • An existing customer with no history in Tier 1 or 2 items that starts shipping them to known transshipment points, or one whose orders for those codes rise sharply.
  • A customer that won't give details about banks, shippers, third parties, end users, end use or ownership.
  • Small payments from one end user's foreign account to several similar suppliers.
  • An ultimate consignee that does not normally use the goods, such as a financial institution, a mail center or a logistics company.
  • A customer paying well above market price.
  • A customer name or address similar to a party on a sanctions or export control list.

The G7 industry guidance, announced by BIS on September 24, 2024, adds categories that a forwarder or customs broker is well placed to spot: misclassified goods or HS codes that don't match the product, circuitous routing, a freight forwarder named as the end user, shipping instructions changed without the exporter knowing, and small, frequent shipments consolidated at a third-country warehouse. The guidance names freight forwarders, customs brokers, logistics companies and warehouse operators among the supply chain parties that should take steps to reduce diversion risk.

All of these documents make the same caveat: no single red flag is necessarily a sign of illicit activity. Weigh it with the other facts of the deal.

What to do when a code is on the CHPL

A flagged HS code is the start of a review, not the end of one. A workable sequence for an exporter or forwarder:

  1. Confirm the code. Check that the HS, HTS or Schedule B number on the commercial invoice or booking matches the goods. The US International Trade Commission notes that the first six digits of Schedule B and HTS numbers are the same, so the CHPL's HS-6 codes can be read against either. A misclassified item is a red flag of its own.
  2. Classify the item for export control. An HS code does not determine an Export Control Classification Number. Work out whether the item is EAR99 or has an ECCN on the Commerce Control List, because that decides which license rules apply.
  3. Check the destination and route. Note the country of the ultimate consignee and any intermediate consignee, and whether the route passes through a transshipment hub.
  4. Screen every party. Run the purchaser, intermediate consignee, ultimate consignee, end user and any forwarding agent abroad against the restricted party lists, by name and by address. The G7 guidance treats an address-only match as a reason for more diligence. Our restricted party screening guide sets out the process, and the Entity List guide covers what a hit on that list means.
  5. Ask about end use and end user. Request a written end-use statement. The G7 guidance suggests asking for written certification that the items will not go to Russia or Belarus, or to sanctioned parties in third countries, and updating distributor agreements to require heightened due diligence.
  6. Look at ownership. Ask who owns the consignee and end user. Name screening does not detect ownership-based restrictions such as OFAC's 50 Percent Rule or the BIS Affiliates Rule; see our Affiliates Rule guide.
  7. Decide, or stop. If you can explain the red flags and confirm the party's bona fides, record why and proceed. If you can't, the G7 guidance says to refrain from the transaction and disclose the information to the appropriate export control or customs agency.
  8. Keep the record. Save the code you checked, the CHPL tier, the screening results with their date, the end-use answers and who made the call.

CHPL in the EU and the UK

US companies often buy from, or ship for, suppliers in Europe, so it helps to know how the same list works there.

  • European Union. Article 12g of Council Regulation (EU) No 833/2014 requires EU exporters to put a "no re-export to Russia" clause in contracts for certain goods, including the common high priority items in Annex XL. According to the Commission's FAQ (version of December 18, 2024), contracts concluded from December 19, 2023 have had to contain the clause since March 20, 2024; the obligation does not apply to counterparties in the partner countries in Annex VIII, which include the United States.
  • United Kingdom. The GOV.UK page says all the items on the list are subject to UK sanctions, while adding that the list does not represent the full extent of UK trade sanctions.

If you are a US forwarder handling EU-origin goods for a non-partner-country consignee, expect your European supplier to ask for contract terms or end-use assurances of this kind.

Checking codes and parties together

The CHPL tells you which goods need a closer look; it says nothing about the people on the shipment. You need both checks. Our free HS code check shows whether a code's first six digits are on the CHPL, in which tier, and whether they appear in Supplement No. 4 to Part 746, with links to each source. It does not classify the item or say whether a license is needed.

For the parties, Kleerance screens names and addresses against the US, EU, UK and UN restricted party lists and keeps a record of each search, which suits freight forwarders clearing bookings that carry CHPL codes. A match is a potential match to review against the official entry, and a no-match only means the names you entered did not match the lists searched on that date.

This guide is general information, not legal advice. Check the current BIS CHPL page, the EAR and the Federal Register before acting on a flagged code.

Screen a party in under a minute

Type a customer, consignee or end user and see any potential matches on 24 official lists, including US, UN, EU, UK, Canada, Switzerland and Japan sanctions and export lists, each linked to the official record.

Free to try. No account or card needed.

About the editor: Michael Green

Michael Green edits Kleerance's guides and checks each one against the primary sources it cites.

Sources last checked .

Spotted an error? Send a correction.

General information, not legal advice. Rules and lists change; check the primary sources linked above and confirm your obligations with qualified counsel.