Restricted party screening: a step-by-step process for SMBs
How to build a restricted party screening process: who owns it, which parties and lists to screen, when to rescreen and how to clear matches.
By Michael Green, Editor. Published , updated . 12 min read.

Restricted party screening (RPS) means checking every party to an export, shipment or payment against government lists of restricted parties before you do business with them. If you are a small or mid-size exporter, freight forwarder or customs broker, you need a repeatable process more than you need clever software. That means a named owner, a defined set of parties and lists, fixed screening points, a written way to clear potential matches, and records you can produce years later. This guide walks through building that process one step at a time and ends with a one-page checklist and a sample decision log.
Key points
- One owner: a named person who keeps the procedure current and can hold an order, booking or payment.
- Every party: customer, consignee, end user, distributors, foreign forwarders, notify party, suppliers and, where relevant, banks.
- Written list scope: the Consolidated Screening List as the US baseline, plus UN, EU, UK or SAM.gov lists only where your business needs them.
- Fixed screening points: onboarding, each order or shipment, before payment and when lists change, with a periodic check that rescreening ran.
- Three outcomes for a hit: cleared, escalated or confirmed, decided on identifiers and recorded.
- Records and training: keep a decision log for 10 years (covering both OFAC and the EAR) and train staff at least annually.
If you want the definition and the difference between "denied party" and "restricted party" terminology, start with our denied party screening guide. This post is about the process.
Screen a party in under a minute
Type a customer, consignee or end user and see any potential matches on 24 official lists, including US, UN, EU, UK, Canada, Switzerland and Japan sanctions and export lists, each linked to the official record.
Free to try. No account or card needed.
Step 1: Give restricted party screening an owner
Screening fails quietly when everyone assumes someone else did it. Pick one person who owns the process. In a 20-person exporter that might be the operations manager. In a forwarder it is often the compliance lead or a senior account manager. Write the role down. The owner:
- keeps the written procedure current
- decides which lists and parties are in scope
- clears or escalates potential matches that front-line staff cannot resolve
- holds the authority to put a booking, order or payment on hold
- makes sure training happens and records are kept
Both U.S. agencies point to management backing as the starting point of an export compliance program. BIS lists "Management Commitment" as the first of its eight elements of an effective export compliance program, and the Office of Foreign Assets Control (OFAC), part of the Department of the Treasury, in its Framework for OFAC Compliance Commitments names five essential components: management commitment, risk assessment, internal controls, testing and auditing, and training. A screening owner with no authority to stop a shipment is not really an owner.
Step 2: Decide which parties to screen
Screen the people and companies that touch the transaction, not just the name on the purchase order. OFAC's framework describes screening customers, the supply chain, intermediaries and counterparties. In export work that usually means:
| Party | Why it matters | Where you find the name |
|---|---|---|
| Customer / buyer | The party you contract with | Order, quote, credit application |
| Ultimate consignee and end user | Who actually receives and uses the goods | Commercial invoice, end-use statement |
| Distributors and resellers | Goods may move on to unknown buyers | Distribution agreement, order history |
| Intermediate consignees and foreign forwarders | Listed parties sometimes appear as "agents" | Booking, house bill of lading |
| Notify party | Another name on the shipping documents | Bill of lading |
| Suppliers and vendors | OFAC sanctions apply to purchases too | Vendor master file |
| Banks, where relevant | Payments routed through a listed bank | Letters of credit, wire instructions |
Freight forwarders should not assume the exporter has already done this. BIS's freight forwarder guidance recommends screening known transaction parties against the Consolidated Screening List "for all transactions," even when the forwarder is not filing the Electronic Export Information. Our freight forwarder page covers forwarder workflows in more detail.
Step 3: Choose which restricted party lists to screen
For U.S. companies, the practical baseline is the Consolidated Screening List (CSL) published by the International Trade Administration. It combines export screening lists from the Department of Commerce, the Department of State and the Department of the Treasury:
- Commerce (BIS): Denied Persons List, Unverified List, Entity List, Military End User List
- State: the AECA Debarred List from the Directorate of Defense Trade Controls (relevant to ITAR defense articles) and Nonproliferation Sanctions
- Treasury (OFAC): the Specially Designated Nationals (SDN) List, Foreign Sanctions Evaders, Sectoral Sanctions Identifications, the CAP list, the Non-SDN Menu-Based Sanctions list, the Non-SDN Chinese Military-Industrial Complex list and the Palestinian Legislative Council list
The lists do different things. The trade.gov page describes the Denied Persons List as parties "denied export privileges," the Entity List as parties whose presence can trigger a license requirement, and the Unverified List as end users BIS could not verify. It calls a UL match a "Red Flag" to resolve before proceeding. A hit on one list may mean a strict prohibition. A hit on another may mean you need a license or an extra statement. That is why review (Step 5) matters.
Add other lists only when your business needs them. Examples are UN, EU or UK sanctions lists if you deal with non-U.S. counterparties or entities subject to those regimes, or the SAM.gov exclusions if you sell under government contracts. Write down which lists you screen and why. "We screen everything" is not a scope statement.
Step 4: Set the screening points
A one-time check at onboarding is not enough, because the lists change. Build screening into fixed points in your workflow:
- Onboarding. Screen a new customer, consignee, supplier or agent before the first quote is accepted or the account is opened.
- Each order, booking or shipment. Screen every party on the documents before release. New consignees and notify parties often appear at this stage, not at onboarding.
- Before payment. Screen the beneficiary and the banks on wire instructions or letters of credit when they differ from what you already screened.
- When lists change. Rescreen your existing customer and vendor base when the lists are updated. The trade.gov page states that the CSL tools are updated daily at 5:00 AM Eastern. OFAC's framework names failing to update screening for list changes as a common failure. Our weekly list changes page shows what was added and removed.
- Periodic rescreening. Even with list-change rescreening, set a calendar review (for example, quarterly) to check that the process actually ran.
Step 5: Review potential matches the same way every time
Most screening hits are false positives: a common name, a partial word or a similar company name. The goal of review is to decide, with evidence, whether your party is the listed party. OFAC's FAQ on assessing name matches sets out steps. Determine whether the hit is against an OFAC list, whether it is a potential match to a listed name, and the quality of that match. Then decide next steps for a valid match, whether blocking is required, and report and keep records. OFAC also says it "does not confirm potential matches or false positives," so the decision is yours.
Compare more than the name:
- Full name and aliases. Listed entries often carry alternate spellings and transliterations. OFAC's framework gives "Habana instead of Havana" as an example of the variations screening must handle.
- Address and country. Does the listed address or country match the one on your documents?
- Identifiers. Registration numbers, tax IDs, vessel IMO numbers or SWIFT/BIC codes, where the list entry includes them.
- Date of birth and nationality. These apply to individuals.
- Business profile. Does the listed party's line of business fit what your customer says it does?
Use three outcomes and nothing in between:
- Cleared (false positive). Identifiers clearly differ. Record why.
- Escalate. You can't rule the match out. Put the order, booking or payment on hold and send it to the screening owner.
- Confirmed match. Stop. Do not ship or pay until you understand what the specific list requires, which may mean a prohibition, a license requirement, blocking or a report. Get qualified export or sanctions counsel involved.
A similarity score from any tool is only a way to rank hits for review. It is not a determination. A "no match" result means only that no listed name matched in the lists searched at that time. It does not clear the transaction.
Step 6: Know what name screening misses
Name screening checks names. It does not answer every export control compliance question.
- Ownership. Under OFAC's 50 Percent Rule, an entity owned 50 percent or more in the aggregate, directly or indirectly, by one or more blocked persons is itself blocked, even if it is not on the SDN List (OFAC FAQs 398–402). For export controls, BIS published an Affiliates rule on September 30, 2025 extending Entity List and Military End User restrictions to entities at least 50 percent owned by listed parties, then suspended it from November 10, 2025, and on November 9, 2026 extended the suspension until January 10, 2027 (91 FR 70789). Check the Federal Register for any further change. For higher-risk counterparties, ask who owns them.
- End use and licensing. A clean screen does not tell you whether the item needs an export license for the destination, or whether the end use is prohibited. Classification and license determination are separate steps under the Export Administration Regulations. Likewise, an HS code on the Common High Priority List is a red flag about the goods that no party screen will raise.
- Red flags. BIS's Know Your Customer guidance says that once red flags appear you must inquire further. Examples from BIS training materials include a customer reluctant to share end-use details, a freight forwarding firm listed as the final destination, and a buyer with little or no business background. BIS also says: don't self-blind. If red flags cannot be explained, the guidance says to refrain from the transaction or submit the information to BIS.
Step 7: Document every result and keep the records
Each screening should leave a record that answers six questions: who was screened, against which lists, when, what came back, who reviewed it, and what was decided and why. Keep the list version or date where your tool provides it.
Two retention rules matter for most exporters:
- OFAC: records under 31 CFR 501.601 must now be kept for 10 years, up from five (OFAC final rule, effective March 21, 2025; the interim rule took effect March 12, 2025).
- BIS: records required by the EAR must be kept for five years from the latest of the export, any known reexport or diversion, or other termination of the transaction (15 CFR 762.6).
The simplest approach for a small company is to keep screening records for 10 years across the board. For what OFAC's rule covers and how to count the period, see what to keep under OFAC's 10-year recordkeeping rule.
Sample decision log
| Date | Party (role) | Lists screened | Result | Evidence reviewed | Decision | Reviewer |
|---|---|---|---|---|---|---|
| 2026-10-14 | Northgate Trading LLC (consignee) | CSL (all sources) | 1 potential match, Entity List | Listed address in a different country; different registration number | Cleared, false positive | J. Ortiz |
| 2026-10-15 | A. Rahimi (end user) | CSL | 1 potential match, SDN | Name and nationality match; DOB not provided by customer | Escalated, booking on hold, DOB requested | Screening owner |
| 2026-10-16 | Coastal Freight Agency (foreign forwarder) | CSL | No match | — | Proceed; ownership question sent (forwarder named as final destination) | J. Ortiz |
The names above are invented for illustration and do not refer to real parties.
Step 8: Write the procedure down and train people on it
A written procedure turns habits into a process someone else can follow when the owner is on vacation. Keep it short: scope (parties, lists), screening points, review steps, hold authority, escalation contacts, and record retention. BIS's compliance program guidance includes screening in written export authorization procedures. OFAC's framework expects training "at a minimum, annually," tailored to the people doing the work.
Train the people who see names first: sales staff entering new accounts, customer service handling bookings, and accounts payable setting up vendors. Show them real examples of false positives and of a match that needs a hold. Then test the process. Pick a few past shipments each quarter and check that every party was screened and that each hit has a recorded decision.
Step 9: Choose a screening tool that fits your volume
There are three realistic options. Each fits a different company.
- Free trade.gov CSL search and API. The CSL search tool supports fuzzy name search, and the CSL API offers machine-readable access along with CSV, TSV and JSON downloads. It costs nothing and covers the core U.S. lists. The trade-offs are that you handle record keeping, rescreening and audit trails yourself. Trade.gov also tells users to check the official publication in the Federal Register and the agencies' own lists before acting on a result. This is a good fit for low volumes with disciplined manual screening and logging.
- Self-serve screening tools. These sit between the free tools and enterprise suites. They typically add automated screening of whole customer files, saved records, rescreening on list updates and exportable logs. Kleerance is one example. Our methodology page explains how we match names and what we do not cover.
- Enterprise trade compliance suites. Products such as Descartes Visual Compliance and other large platforms often bundle screening with ERP integration, broader global watch lists and wider trade compliance features. They suit high-volume or multi-country operations with the budget and staff to run them.
Whichever you choose, ask: which lists and versions are covered, how quickly updates arrive, how matches are explained, whether you can export the decision log, and whether existing records are rescreened automatically. No tool removes the need for human review and a written procedure.
One-page restricted party screening checklist
- Named screening owner with authority to hold orders, bookings and payments
- Written scope: parties screened (customer, consignee, end user, distributors, forwarders, notify party, suppliers, banks where relevant)
- Written list scope: CSL at minimum, plus any non-U.S. or contract-specific lists, with reasons
- Screening at onboarding, at each order or shipment, before payment, and on list updates
- Periodic check (for example, quarterly) that rescreening actually ran
- Match review compares name, aliases, address, country, identifiers, DOB and business profile
- Three outcomes only: cleared, escalated (on hold), confirmed (stop and get counsel)
- Ownership questions asked for higher-risk counterparties (OFAC 50 Percent Rule; BIS Affiliates rule status checked)
- Red flags from BIS Know Your Customer guidance reviewed; no self-blinding
- Classification and license determination handled separately from name screening
- Decision log kept for every hit; records retained 10 years
- Training at least annually for everyone who enters names; quarterly spot audit
This guide is general information, not legal advice. Screening results are only as good as the data and review behind them. Confirm potential matches against the official lists and get qualified counsel for confirmed matches.
Screen a party in under a minute
Type a customer, consignee or end user and see any potential matches on 24 official lists, including US, UN, EU, UK, Canada, Switzerland and Japan sanctions and export lists, each linked to the official record.
Free to try. No account or card needed.
Sources
- International Trade Administration, Consolidated Screening List
- Bureau of Industry and Security, Know Your Customer guidance and Know Your Customer resources
- Bureau of Industry and Security, Freight forwarder guidance
- Bureau of Industry and Security, How to create an effective export compliance program
- Bureau of Industry and Security, 15 CFR 762.6 period of retention
- Federal Register, Suspension of the Affiliates rule, 90 FR (Nov. 12, 2025)
- Federal Register, Extension of the Affiliates rule suspension to January 10, 2027, 91 FR 70789 (Nov. 9, 2026)
- OFAC, A Framework for OFAC Compliance Commitments
- OFAC, FAQs: Assessing OFAC name matches and 50 Percent Rule FAQs
- OFAC, Final rule extending recordkeeping to 10 years; 31 CFR 501.601
About the editor: Michael Green
Michael Green edits Kleerance's guides and checks each one against the primary sources it cites.
Sources last checked .
Spotted an error? Send a correction.
General information, not legal advice. Rules and lists change; check the primary sources linked above and confirm your obligations with qualified counsel.