Skip to content

Denied Persons List (DPL): what a BIS denial order means

What the BIS Denied Persons List is, what a denial order bars you from doing, how to read a DPL entry and what to do when a party matches it.

By Michael Green, Editor. Published . 14 min read.

Flowchart: when a name matches the Denied Persons List. 1, hold the transaction: don't ship, release, forward or service the item. 2, compare name, full address and country against the order. 3, open the newest Federal Register order and check the dates, type of denial and related persons. 4, decide on the facts. If it is the same person and the order is in effect, the transaction can't go ahead under General Prohibition Four unless BIS authorizes it. If you can't rule it out, treat it as a match and escalate to BIS Export Enforcement or trade counsel. If it is a different party, record what you compared and why. Document every decision; a no-match is not a clearance.
Four steps for working through a Denied Persons List match. Diagram by Kleerance, drawn from the sources cited in this guide. General information, not legal advice. How we make and check images

The Denied Persons List (DPL) is the Bureau of Industry and Security's list of individuals and companies whose export privileges have been taken away by a denial order under the Export Administration Regulations (EAR). A denied person may not take part in any transaction involving items subject to the EAR, and nobody else may export to, buy from, finance, forward or service items for that person in breach of the order. The order published in the Federal Register is the controlling document, so the list tells you where to look, not the full answer.

Key points

  • Who keeps it: the Bureau of Industry and Security (BIS), part of the US Department of Commerce. BIS says the list covers parties denied export privileges under EAR parts 764 and 766.
  • What a listing does: it reflects a denial order. Under General Prohibition Four you may not take any action that order prohibits, and no license exception authorizes it.
  • It binds you, not only the denied person: the standard order terms bar anyone from exporting to, acquiring from, or servicing items for the denied person.
  • Read the entry: each row has an effective date, an expiration date, Federal Register citations and a type of denial (standard or non-standard). Non-standard orders have their own terms.
  • US parties are on it too: the list includes US addresses as well as foreign ones, and the order covers some dealings inside the United States.
  • Ownership: a denial order reaches related persons only once BIS names them. Name screening will not show you who owns or controls a counterparty.

Screen a party in under a minute

Type a customer, consignee or end user and see any potential matches on 24 official lists, including US, UN, EU, UK, Canada, Switzerland and Japan sanctions and export lists, each linked to the official record.

Free to try. No account or card needed.

What the Denied Persons List is

BIS describes the DPL as the names of parties that have been denied export privileges in accordance with the EAR, parts 764 and 766, and as a list of individuals, companies and organizations barred from activity such as exporting, reexporting or receiving exports of items from the United States (BIS DPL page, last updated November 3, 2026 when we checked it on November 6, 2026).

It sits alongside the other Commerce screening lists, but it works differently. The Entity List creates a license requirement for named foreign parties. The DPL is an enforcement tool: each name is there because an order cut that person off from EAR-controlled trade. That is why the International Trade Administration's summary on the Consolidated Screening List page puts it bluntly: any dealings with a listed party that would violate the terms of its denial order are prohibited.

A few things follow from that:

  • The restriction comes from an individual order, not from a list-wide rule. Two entries can carry different terms.
  • The standard order covers any commodity, software or technology subject to the EAR, whatever its classification, not only items that need a license to the destination.
  • Denied persons are not all foreign. The list includes companies and people with US addresses, and the order reaches transfers within the United States in some cases (see the second set of terms below).

How a person ends up on the DPL

Denial orders come out of BIS's administrative enforcement process in part 766 of the EAR. The routes you will see most often in Federal Register citations are:

RouteRuleWhat it means in practice
Final decision or settlementPart 766 proceedings after charges of violation, or a settlement agreement (Supplement No. 1 to part 764 lists both as bases)A fixed denial period, sometimes with part of it suspended on conditions of probation
Temporary denial order (TDO)§ 766.24Issued when BIS shows it is necessary in the public interest to prevent an imminent violation; lasts up to 180 days and can be renewed
Denial after a criminal conviction§ 766.25Follows a conviction under the statutes listed in 50 U.S.C. 4819(e)(1)(B); the denial cannot exceed 10 years from the date of conviction
Related person§ 766.23Another person connected to the respondent by ownership, control, position of responsibility, affiliation or other connection in the conduct of trade or business, added to stop evasion

Two details about TDOs matter for screening. First, § 766.24 says "imminent" can mean either close in time or highly likely, so a TDO can land on a company with no prior record. Second, renewals normally run up to 180 days, BIS can ask for up to one year in some cases, and a TDO can be renewed more than once. A TDO that has lapsed may simply have been renewed by a later order, which is why the citation column often lists several Federal Register notices.

Every TDO and renewal is published in the Federal Register under § 766.24, and Supplement No. 1 to part 764 says all denial orders are published there. General Prohibition Four adds that these published orders are the legally controlling documents.

What a denial order prohibits

Most entries are standard orders. The terms are set out in Supplement No. 1 to part 764 and fall into three parts.

First, what the denied person cannot do. The denied person may not take part, directly or indirectly, in any transaction involving an item exported or to be exported from the United States that is subject to the EAR, or in any other activity subject to the EAR. The supplement gives examples: using a license, license exception or export control document; negotiating, ordering, buying, receiving, selling, storing, forwarding, transporting or financing such an item; and benefiting in any way from such a transaction.

Second, what everyone else cannot do. No person may, directly or indirectly:

  1. export, reexport or transfer (in-country) an item subject to the EAR to the denied person or on its behalf;
  2. help the denied person acquire ownership, possession or control of such an item, including by financing;
  3. acquire such an item from the denied person, or help someone else do so;
  4. obtain an item from the denied person in the United States knowing, or having reason to know, that it will be exported;
  5. service (install, maintain, repair, modify or test) an item subject to the EAR that the denied person owns, possesses or controls, or service any item for it using US-exported items subject to the EAR.

Third, related persons. Under § 766.23, companies or people related to the denied person can be made subject to the same order, normally after notice and a chance to respond; related persons can be added to a temporary denial order without prior notice.

Non-standard orders can be narrower or add conditions. The supplement says each order states the denied and related persons, the basis for the order, the denial period, the effective date, any suspended portion and conditions of probation, and whether existing licenses are suspended or revoked. If the "Type of Denial" column says non-standard, read that order before deciding anything.

General Prohibition Four says BIS may, on an exceptional basis, authorize activity a denial order would otherwise prohibit. That is a request to BIS, not something you can assume.

What a denial order means for your role

The standard terms are written around actions, so they map onto ordinary trade roles. This is our reading of the supplement for common situations; check the actual order for any real case.

Your roleWhere the order bitesCheck before you proceed
ExporterSelling, shipping or transferring any item subject to the EAR to a denied person or on its behalf, whatever its classificationEvery party on the order: buyer, consignee, end user, agent, notify party
Freight forwarder or NVOCCForwarding, transporting or storing an item for a denied person; General Prohibition Ten also covers forwarding and servicing items with knowledge of a violationShipper, consignee, notify party and any overseas agent on the booking
US distributor or resellerBuying from a denied person, or selling to one in the US when you know or have reason to know the item will be exportedDomestic customers who ask for export packing or overseas delivery
Service provider or repair shopInstalling, maintaining, repairing, modifying or testing an item the denied person owns or controlsWho owns the equipment, not only who pays the invoice
Customs broker or trade services firmFacilitating or servicing an EAR transaction for a denied person, for example on export filingsClients and their counterparties on export-side work

General Prohibition Ten is the backstop. It bars selling, financing, storing, transporting, forwarding or otherwise servicing an item subject to the EAR with knowledge that a violation has occurred, is about to occur or is intended. A forwarder that knows a consignee is a denied person cannot rely on the exporter's paperwork.

How to read a DPL entry

The BIS table has five columns (BIS DPL page, checked November 6, 2026):

ColumnHow to use it
Name and AddressThe denied person and the address in the order. Compare the full address and country, not only the name.
Effective DateWhen the denial took effect.
Expiration DateWhen it ends. Some entries have no expiration date in the table; treat those as open-ended until the order says otherwise.
Appropriate Federal Register CitationsThe order and any later notices (renewals, modifications, related-person additions). One cell can hold several citations.
Type of DenialStandard or non-standard. Non-standard means the order has its own terms.

Practical rules for reading it:

  • Dates first. An expiration date in the past, or a lapsed TDO, may mean the denial has ended, or that a renewal is published under a later citation. Check the latest citation before treating the party as no longer denied.
  • Follow the newest citation. Renewals and related-person orders are added as new Federal Register notices. The most recent one usually states the current terms.
  • Check suspended periods. BIS says the list shows how long any portion of a denial is suspended, and each order states any conditions of probation. Read those terms; a suspended period is not the same as an expired one.
  • Use the recent changes tab. The BIS page has a "Recent changes" tab covering updates in the past 90 days and a CSV export. If you screen through a vendor or the CSL, this is a quick way to see what moved since your last download.

How to screen against the Denied Persons List

You can search the BIS table directly or, more practically, through the Consolidated Screening List, which combines the DPL with the other Commerce, State and Treasury export screening lists. ITA says the CSL tools update every day at 5:00 AM Eastern, but only as fast as each agency provides its file, and that users must check the Federal Register and the agencies' official lists before taking further action on a match. Our CSL guide covers the search tool and API.

A workable screening process for the DPL looks like this:

  1. Screen every party. Buyer, intermediate consignee, ultimate consignee, end user, forwarding agent, notify party, and any person who will service or benefit from the item. The order bars indirect participation, so "they are only the agent" is not a defense.
  2. Screen names and addresses. Include trade names, former names and the addresses on the commercial invoice and booking.
  3. Screen domestic customers too when an order shows export intent: an export address, a foreign end user, or a request to pack for ocean freight.
  4. Re-screen on change and before shipment. TDOs can appear with no warning, and a customer cleared at onboarding can be denied months later.
  5. Ask about ownership and control. A denied person's affiliates are covered only once named as related persons, but a company run by a denied individual is a red flag in its own right.
  6. Keep the record. Log what you searched, when, which lists, what matched and how you resolved it. The EAR's five-year retention rule in § 762.6 runs from the latest of the export, any known reexport or transfer, or other termination of the transaction.

Screening tools, including ours, match strings. A fuzzy-match score measures how similar two names are; it is not a finding that your customer is the denied person.

When a party matches the DPL

Treat a match as a reason to stop and look harder.

  1. Hold the transaction. Do not ship, release, forward, service or take further payment steps while you check.
  2. Compare identifiers. Name, full address, country, and any company or individual details in the order. A common name in a different country is often a different person.
  3. Open the order. Use the newest Federal Register citation on the entry. Confirm the dates, the type of denial and whether related persons are named.
  4. Decide on the facts. If it is the denied person and the order is in effect, the transaction cannot go ahead under General Prohibition Four unless BIS authorizes it. If you cannot rule the match out, treat it as a match.
  5. Escalate close calls. BIS lists an Export Enforcement contact for DPL inquiries on its DPL page; experienced trade counsel can advise on a specific transaction.
  6. Document the decision. Record who reviewed it, what they compared and why they decided as they did.

A "no match" is not a clearance. It means the names you entered did not match the lists you searched on that date. It says nothing about the item's classification, the end use, the destination or who owns the counterparty.

DPL vs the Entity List and the SDN List

Denied Persons ListEntity ListOFAC SDN List
AgencyCommerce, BISCommerce, BISTreasury, OFAC
BasisIndividual denial orders (EAR parts 764 and 766)EAR part 744, with a license requirement set per entrySanctions programs under statutes and executive orders
EffectLoss of export privileges; no one may deal in EAR items with or for the person in breach of the orderLicense required for the items the entry coversProperty blocked; US persons generally may not deal with the party
OwnershipRelated persons only once named in an orderAffiliates Rule, when in force (see our guide)OFAC 50 Percent Rule

The lists overlap in places but are separate legal regimes. A party can sit on more than one, so finish the check on every list rather than stopping at the first hit. OFAC's 50 Percent Rule blocks entities owned 50 percent or more, in the aggregate, by blocked persons, and BIS's Affiliates Rule, when in force, extends certain end-user controls, including the Entity List and Military End-User List, to affiliates owned 50 percent or more by listed parties (BIS announcement, September 29, 2025); our BIS Affiliates Rule guide tracks its current status. Neither rule turns a denied person's subsidiaries into denied persons, and name screening does not detect ownership-based restrictions under any of them.

For how the lists fit into one process, see our guides to denied party screening and building a restricted party screening process.

Common questions

Who publishes the Denied Persons List? BIS, in the Department of Commerce. It is not an Office of Foreign Assets Control (OFAC) list: Treasury publishes the Specially Designated Nationals and Blocked Persons (SDN) List, and the two are separate sanctions and export control tools that often get lumped together as "denied party lists".

Is the DPL the same as denied party screening? No. Denied party screening is the practice of checking customers, suppliers and other business partners against many restricted party lists. The DPL is one of those lists, and one of the strictest for exporters because the restriction applies to almost any dealing in EAR items with the listed person.

What happens if you deal with a denied person? Supplement No. 1 to part 764 says failing to comply with a denial order is itself a violation of the EAR, and part 764 sets out the administrative sanctions BIS can impose for violations, including civil monetary penalties and orders denying export privileges. General Prohibition Four puts the responsibility on you to make sure your transactions do not breach an order.

Do we need to check the DPL if we only sell in the United States? Often, yes. The standard terms bar obtaining items from a denied person in the US with knowledge that they will be exported, and General Prohibition Four notes that orders reach some transfers within a country. A domestic buyer that asks you to ship to a port or a foreign address deserves a check.

How often should we screen? At onboarding, before each shipment and whenever party details change. Automated re-screening against a daily feed is the practical way to catch a new temporary denial order between orders; screening software only helps if someone reviews the alerts it raises.

Checking the DPL alongside the other lists

Kleerance screens names and addresses against the BIS Denied Persons List together with the other US, EU, UK and UN restricted party lists and keeps a dated record of each search, which suits freight forwarders clearing bookings with several parties. You can also run a free denied party screening search. A match is a potential match to review against the denial order, and our methodology page explains how the matching works and where it stops.

This guide is general information, not legal advice. Check the current BIS Denied Persons List, the denial order in the Federal Register and the EAR before acting on a match.

Screen a party in under a minute

Type a customer, consignee or end user and see any potential matches on 24 official lists, including US, UN, EU, UK, Canada, Switzerland and Japan sanctions and export lists, each linked to the official record.

Free to try. No account or card needed.

Sources

About the editor: Michael Green

Michael Green edits Kleerance's guides and checks each one against the primary sources it cites.

Sources last checked .

Spotted an error? Send a correction.

General information, not legal advice. Rules and lists change; check the primary sources linked above and confirm your obligations with qualified counsel.